self-clinching nuts,self-clinching nuts,self-clinching nuts,self-clinching nuts,self-clinching nuts,self-clinching nuts,self-clinching nuts,self-clinching nuts,self-clinching nuts,self-clinching nuts;self-clinching nuts,self-clinching nuts,self-clinching nuts,self-clinching nuts,self-clinching nuts,self-clinching nuts,self-clinching nuts,self-clinching nuts,self-clinching nuts,self-clinching nuts
home | about | products | standard | contact
self-clinching nuts
self-clinching
standoffs
panel
fasteners
studs,
pins and plugers
customized
products
products->self-clinching nuts
nuts
s cls
strong internal threads in sheets as thin as0.03"/0.8mm.thread sizes #2 to 1/2" and m2 to m10.
flush nuts
f
fastener remains flush with both sides in sheets as thin as 0.06"/1.5mm.thread sizes #2 to 1/4" and m2 to m6.
flare-in nuts
z zs nz nzs available with round or hexagon.thread sizes m3 to m8.
floating nuts
as ac las lac floating action compensates for mating hole misalignment.available
with locking and non-locking threads.thread sizes #4 to 1/4" and m3
to m6.
self-locking fasteners
fe feo fex feox strong threads in a minimum of space.available with locking
and non-locking threads. can be installed into sheets as thin as 0.03"/0.76mm.thread
sizes #4 to #10 and m2 to m6.
lk lks lka have locking ferformence without damaging mating threads.thread
sizes #2 to #10 and m2.5 to m5.
pl plc prevents thread galling.thread sizes #4 to #10 and m3 to m5.
nuts for use in pc boards
kf2 kfs2 interally thread fasteners for mounting into pc boards.thread
sizes #2 to #10 and m2 to m5.